Cleaning multiple mold parts at once

● Mold Cleaning Machine "CLIPIKA ACE"

<Features>

*Capable of cleaning multiple mold parts at once
*Removal in a short time: PPS, POM, etc., stains, molding gas, burns, rust, etc.
*Cleaning is possible even in holes that tools cannot reach, and on delicate grains and mirrored surfaces.

(Note)
Cleaning examples are shown in detail in website in the "Company Profile" section at the end of this page.

Example of Mold Maintenance Effectiveness

<Benefits>

*Reduction in the number of mold maintenance
and significant reduction in mold maintenance time and cost
*Molds do not rust in storage
*Increased molding machine utilization

Just connect the mold to the Cleaning Machine.

●Mold Temperature Control Pipe Cleaning Machine "SUKATTOSU/WATER REAMER"

<Features>

*Cleaning the inside of the piping without disassembling the molds.
*Cleaning, drying, and rust prevention are completed in one cycle.
*Complex 3D piping, under hoppers of molding machines, temperature controllers can also be used for chillers and manifolds

(Note)
Cleaning examples are shown in detail in website in the "Company Profile" section at the end of this page.

Example of Mold Maintenance Effectiveness

<Benefits>

*Significantly shortens maintenance time.
*Automated maintenance eliminates individual differences and labor shortages.
*Reduce outsourcing and replacement costs by in-house maintenance operation.
*Flow rate and cooling efficiency can be improved to shorten molding shot cycle

Easy contact welding with no protective surface required

●Metal Mold Repair Welding Machine "MOLHEI"

<Features>

*No UV rays or fumes, no need for protective surfaces
*Contact welding keeps you on target
*Possible to overlay small parts that would melt by argon welding.

(Note)
Welding examples are detailed in website shown in the "Company Profile" section at the end of this page.

Welding Examples

<Benefits>

*No need to run to a welding shop for even the slightest scratch. Quick and easy in-house overlay repair is possible.
*Anyone can easily repair of burr stoppers, pinholes and cut-outs, and moreover can adjust pitch and apply shims to raise the height.